-
![[Copy] Screw landing valve text](https://cdn.globalso.com/nbworldfire/e93f1066-300x300.png)
[Copy] Screw landing valve text
Description: Oblique Landing Valve is a type of globe pattern hydrant valve. These oblique type landing valves are available with flanged inlet or screwed inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bars. The internal casting finishes of every valve is of high quality ensurin... -
Brass Siamese connection
Description: Siamese connection is use for fire fighting in water-supply service indoor or outdoor areas both .The connection one size fit with the pipe and one side connected to the hose with couling then fiting with the nozzles.When in use,open the valve and transfer water to the nozzle to extinguish the fire.The siamese connection are made by brass and iron, with smooth appearance and high tensile strength. In the production process, we strictly follow the UL standards for processing and ... -
Marine right angle valve
Description: Marine right angle valves are a type of globe pattern hydrant valves. These type valves are available with flanged inlet or screwed inlet and are manufactured to comply to marine standard. The angle valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 16 bars. The internal casting finishes of every valve is of high quality ensuring a low flow restriction that meets the standard’s water flow test requirement.Marine angle valve have ma... -
2 way breeching inlet
Description: Breeching Inlets are installed outside the building or any easily accessible area in the building for firefighting purposes by fire brigade personnel to access the inlet. Breeching Inlets are fitted with inlet connection at fire brigade access level and outlet connection at specified points. It is normally dry but capable of being charged with water by pumping from fire service appliances. Key Specificatoins: ●Material:Cast iron/Dutile iron ●Inlet:2.5” BS instantaneous male c... -
wet type fire hydrant
Description: 2 Way Fire (Pillar) Hydrants are Wet-barrel fire hydrants for use in water-supply service outdoor areas where the climate is mild and freezing temperatures do not occur. A wet-barrel hydrant has one or more valve openings above the ground line and, under normal operating conditions, the entire interior of the hydrant is subjected to water pressure at all times. Key Specificatoins: ●Material:Cast iron/Dutile iron ●Inlet: 4” BS 4504 / 4” table E /4” ANSI 150# ●Outlet:2.5” fema... -
Pressure reducing valve E type
Description: E type pressure reducing valve is a type of pressure regulating hydrant valve. These valves are available with flanged inlet or screwed inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 20 bars. The internal casting finishes of every valve is of high quality ensuring a low fl... -
Right angle valve
Description: Angle Landing Valve is a type of globe pattern hydrant valve. These angle type landing valves are available with male outlet or female out and are manufactured to comply to FM&UL standard The Angle landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 16 bars. The internal casting finishes of every valve is of high quality ensuring a low flow restriction that meets the standard’s water flow test requirement.There are two t... -
Screw landing valve
Description: Oblique Landing Valve is a type of globe pattern hydrant valve. These oblique type landing valves are available with flanged inlet or screwed inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bars. The internal casting finishes of every valve is of high quality ensuring a l... -
Flange landing valve
Description: Flange Landing Valve is a type of globe pattern hydrant valve. These oblique type landing valves are available with flanged inlet or screwed inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bars. The internal casting finishes of every valve is of high quality ensuring a low... -
Flange pressure reducing valve
Description: Flanged pressure reducing valves are Wet-barrel fire hydrants for use in water-supply service outdoor areas where the climate is mild and freezing temperatures do not occur. The pressure valve has screw one and flange one.Fitting with pipe and assemble on the wall or in the fire cabinet, the entire interior of the hydrant is subjected to water pressure at all times. Key Specificatoins: ●Material:Brass ●Inlet: 2.5” BS 4504 / 2.5” table E /2.5” ANSI 150# ●Outlet:2.5” female BS ... -
4 way breeching inlet
Description: Breeching Inlets are installed outside the building or any easily accessible area in the building for firefighting purposes by fire brigade personnel to access the inlet. Breeching Inlets are fitted with inlet connection at fire brigade access level and outlet connection at specified points. It is normally dry but capable of being charged with water by pumping from fire service appliances. When a fire occurs, the water pump of the fire truck can be quickly and conveniently conne... -
Din landing valve with storz adapter with cap
Description: DIN landing valves are Wet-barrel fire hydrants for use in water-supply service outdoor areas where the climate is mild and freezing temperatures do not occur. The valves are forged and normal have 3 types size,DN40,DN50 and DN65.Landing valve C/W LM adapter and cap then spray red. Key Specificatoins: ●Material:Brass ●Inlet: 2″BSP/2.5″BSP ●Outlet:2″STORZ / 2.5″STORZ ●Working pressure:20bar ●Test pressure:24bar ●Manufacturer and certified to DIN sta...
